Disco de corte 7 search guide: 230 mm abrasive discs compared

TECHNICAL NOTECOMPARISON

Key data

Dimensions and operating rating
Abrasive construction and grit options
Primary application

Abstract

For buyers comparing a 230 mm metal cutting disc with a 230 mm grinding disc, the main choice is the work: cutting ferrous metal calls for the 3 mm disc, while weld grinding and stock removal call for the 6.8 mm depressed-center disc. Both use a 22.2 mm arbor and have an 80 m/s maximum working speed.

Disco de corte 7 search guide: 230 mm abrasive discs compared
Illustration for reference; see the product page for actual photos and specifications.

A disco de corte 7 search may lead to different 230 mm abrasive discs, so match the disc to the operation before comparing catalog names. The two products here share a 230 mm diameter, 22.2 mm arbor, resin bonding, R hardness, and an 80 m/s maximum working speed. Their applications and thicknesses set them apart.

§1

Side-by-side specifications

Criterion9 Inch 230mm X 3mm X 22.23mm Abrasive Discs For Angle Grinder9 Inch Angle Grinder Discs 230mm X 6 X 22.2mm 3 Nets T27
Diameter230 mm (9\")230 mm (9\")
Bore diameter22.2 mm (7/8\")22.2 mm (7/8\")
Listed thickness3.2 mm6.8 mm
Disc typeDepressed center typeType-27, depressed center
AbrasiveAluminum oxideBrown aluminum oxide
HardnessR gradeR grade
Bonding agentResin bondedResin bonded
Maximum working speed80 m/s, 6,650 RPM80 m/s, 6,650 RPM
Grit options24#, 30#, 46#, 60#24#, 30#, 46#
Primary applicationFerrous metal and steel cuttingPolishing and grinding metal welds

The shared 230 mm diameter and 22.2 mm bore make mounting dimensions a straightforward first check. The stated maximum working speed is also the same for both products, at 80 m/s and 6,650 RPM. Use the rating that matches the disc and machine combination.

§2

Choose by the workpiece operation

The 3.2 mm 9 Inch 230mm X 3mm X 22.23mm Abrasive Discs For Angle Grinder is aimed at ferrous metal and steel cutting. Its listed applications cover common steel sections and sheet materials. The product description also specifies a 90-degree presentation to the workpiece for metal cutting. This option suits an order centered on cutting steel sections and other ferrous shapes.

The 6.8 mm 9 Inch Angle Grinder Discs 230mm X 6 X 22.2mm 3 Nets T27 is aimed at polishing and grinding metal welds. Its listed applications cover ferrous metals, steel, stainless steel, rebar, iron pipe, bar stock, and metal tubing, with use in tank fabrication, power plant maintenance and repair, and welding or metal fabrication shops. Choose this configuration when the job centers on weld dressing or stock removal.

§3

Abrasive and grit selection

Both products use aluminum-oxide abrasive and resin bonding, with R grade hardness. The 3.2 mm cutting disc has four listed grit options: 24#, 30#, 46#, and 60#. The 6.8 mm grinding disc has three: 24#, 30#, and 46#. A buyer comparing grit availability should match the required finish or removal approach to the options offered for the selected disc.

The 6.8 mm product specifies brown aluminum oxide and a 3-net fiberglass reinforcement in its product name and description. The 3.2 mm product specifies fiberglass reinforcement and aluminum oxide abrasive. Keep these construction descriptions with the purchasing specification so the received disc matches the intended configuration.

The two options

9 Inch 230mm X 3mm X 22.23mm Abrasive Discs For Angle Grinder9 Inch Angle Grinder Discs 230mm X 6 X 22.2mm 3 Nets T27

Which option fits your order?

Pick the 3.2 mm disc when the purchase is for cutting ferrous metal and steel. Pick the 6.8 mm disc when the purchase is for polishing and grinding welds, aggressive stock removal, or metal fabrication work involving the listed ferrous materials.

For a broader 230 mm grinding-disc option, see our 9-inch angle grinder discs. Before placing an order, send the machine arbor size, required operation, material, diameter, and target grit to the supplier.

The company

Hebei Double Goats Grinding Wheel Manufacturing Co., Ltd.

Hebei Double Goats Grinding Wheel Manufacturing Co., Ltd. • Established in 1995 and Engaged in export business for more than twenty years.• A professional company integration of research, production and marketing on resin bonded cutting and grinding wheel.• Covers a total area of 58,000 square meters, and has 76 sets of fully-automatic production equipment, with daily production capacity of 400,000 pcs.• More than 400 employees (including 48 researchers)• ISO9001, ISO14001, OHSAS 18001, and MPA EN12413…

About Us ↗Visit company website ↗

Post time:Nov - 18 - 2026
Prev:
This is the last article
tel
email
phone
top

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


Leave Your Message